KOBE Range Hoods Brillia Series INX28 SQ-700-2 Series Model No.
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects. 3. Have a certified contractor/ electrician test the unit before installation. IF THERE IS ANY PROBLEM: 1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL PACKAGING MATERIAL. 2. Have your original invoice as proof of purchase and product serial number ready. 3.
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS - CONTENETS IMPORTANT SAFETY INSTRUCTIONS ........................................................................ 1 COMPONENTS OF PACKAGE ...................................................................................... 3 INSTALLATION ............................................................................................................... 5 OPERATING INSTRUCTIONS .......................................................................................
IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1. Installation and electrical wiring be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction. 2. When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities. 3.
What to Do in the Event of a Range Top Grease Fire 1. SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911. 2. NEVER PICK UP A BURNER PAN – You May Get Burned. 3. DO NOT USE WATER, including wet dishcloths or towels – a violent steam blast will result. 4. Use an extinguisher ONLY if: a.
COMPONENTS OF PACKAGE (Must keep all materials for returns or refunds) MODEL NO.
(Must keep all materials for returns or refunds) MODEL NO.
INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before installation To calculate installation, please refer to TABLE 1. (All calculation in inches).
6. It is recommended to use metal / aluminum duct/pipe with a uniform size (ex. 6” round pipe from range hood to the outside). 7. If an elbow is necessary, a minimum of 12” straight run is necessary before the elbow. Clearance 8. Clearance is the distance between the cooktop and the bottom of the range hood. The recommended minimum clearance for this model is 26” and the maximum clearance is 30”. 9. It is important to install the hood at the recommended clearance.
Electrical Wire 20. Connect the range hood to an outlet. 21. If hardwired is desired, cut off the plug and connect three wires (black, white, green) to the outlet wires and cap with wire connectors. Connect the wires according to color (ex. black to black). Finish 22. Remove any protective film from the hood, if any. 23. Before using, make sure that any accessories such as baffle filters are properly installed when applicable. 24. Test the range hood to see if it is working properly.
OPERATING INSTRUCTIONS 3-Speed Mechanical Control Note: For best result, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as needed.
MAINTENANCE For optimal performance, clean the range hood surface and filters regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. ***Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth. 2. If hood looks smudged (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel.
SPECIFICATIONS MODEL / SIZE INX2830SQB-700-2 (30”) INX2830SQH-700-2 (30”) COLOR 20-Gauge Commercial Grade Stainless Steel CONSUMPTION / AMPERE 240W / 2.0A NUMBER OF BLOWERS 1 DESIGN Satin Finish BLOWER TYPE Single Horizontal Squirrel Cage EXHAUST Top 6” Round CONTROL Mechanical Push Button LIGHT 3-watt LED Light x 2 HOOD DIMENSION (W x D x H) INX2830SQB-700-2 INX2830SQH-700-2 OPTIONAL ACCESSORIES (W x D x H) 1. 30” Stainless Steel Back Panel Model: SSP30 (30” x 32” x 1/10”) 2.
MEASUREMENTS & DIAGRAMS ***All inch measurements are converted from millimeters. Inch measurements are estimated. ***All measurements in ( ) are millimeters. MODEL NO.
PART LIST MODEL NO.: INX2830SQB-700-2 (30”) NO. 1 2 3 4 5 6 7 8 DESCRIPTION 6” Exhaust Vent LED Light Driver Capacitor (12uF, 250 VAC) LED Light (3W) x 2 Control Switch Blower System Aluminum Filter (239mm x 226mm) Baffle Filter (239mm x 226mm) MODEL / SIZE INX2830SQB-700-2 INX2830SQB-700-2 12 PART NO.
MODEL NO.: INX2830SQH-700-2 (36”) NO. 1 2 3 4 5 6 7 8 DESCRIPTION 6” Exhaust Vent LED Light Driver Capacitor (12uF, 250 VAC) LED Light (3W) x 2 Control Switch Blower System Aluminum Filter (239mm x 226mm) Honeycomb Filter (239mm x 226mm) 13 MODEL / SIZE INX2830SQB-700-2 INX2830SQB-700-2 PART NO.
CIRCUIT DIAGRAM MODEL NO.
TROUBLE SHOOTING Issue After installation, both motors and lights are not working. Lights are working, but motor(s) is not. The range hood is vibrating. The motor is working, but the lights are not working. The range hood is not venting out correctly. Possible Cause The power is not on. The wire connection is not secure. The control panel is defective. The motor(s) is defective. The capacitor(s) is defective. The control panel is defective. The blower system is not secure.
WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. ONE-YEAR LIMITED LABOR WARRANTY ON KOBE BRILLIA SERIES: For one year from the date of your original invoice from KOBE authorized dealer, we will repair any parts or components free of charge that failed due to manufacturing defects.
THIS WARRANTY WILL BE VOIDED BY: 1. Improper installation and failure to follow installation instructions. 2. Any repair, alternation, modification not authorized by KOBE. 3. Duct alternation, modification, and connection. 4. Incorrect electric current, voltage, or wiring. 5. Improper usage of the product such as commercial, outdoor, or other usage other than residential indoor usage. 6. Purchasing this product from an unauthorized KOBE dealer. 7.
WARRANTY INFORMATION FORM Fills in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : _______________________________ 2. Model No. :_______________________________ 3. Serial No. :_______________________________ For warranty service or spare parts purchase in US, contact: KOBE Service Center Email (best): customer.service@koberangehoods.
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood overseas is at your own risk and will void your warranty. Cette hotte KOBE est fabriquée pour usage aux États-Unis et au Canada seulement.
