KOBE Range Hoods Brillia Series INX28 SQ-700-1 Series Model No.
IMPORTANT READ THIS FIRST READ BEFORE INSTALLATION 1. Carefully check all contents of packages. 2. Thoroughly inspect the unit for any shipping damages, cosmetic damages or defects 3. Have a certified contractor/electrician test the unit before installation. IF THERE ARE ANY PROBLEMS: 1. DO NOT INSTALL THE UNIT AND KEEP ALL ORIGINAL PACKAGING MATERIAL. 2. Have your original invoice as proof of purchase and product serial number ready. 3.
[ENGLISH] - READ AND SAVE THESE INSTRUCTIONS – CONTENTS IMPORTANT SAFETY INSTRUCTIONS ........................................................................ 1 COMPONENTS OF PACKAGE ...................................................................................... 3 INSTALLATION ............................................................................................................... 4 OPERATING INSTRUCTIONS .......................................................................................
IMPORTANT SAFETY INSTRUCTIONS - PLEASE READ THIS SECTION CAREFULLY BEFORE INSTALLATION - WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PERSONAL INJURY, OBSERVE THE FOLLOWING: 1) Installation and electrical wiring must be done by qualified professionals and in accordance with all applicable codes and standards, including fire-rated construction. 2) When cutting or drilling into wall or ceiling, be careful not to damage electrical wiring or other hidden utilities.
What to Do In the Event Of a Range Top Grease Fire SMOTHER FLAMES with a tight fitting lid, cookie sheet, or metal tray, and then turn off the burner. KEEP FLAMMABLE OR COMBUSTIBLE MATERIAL AWAY FROM FLAMES. If the flames do not go out immediately, EVACUATE THE AREA AND CALL THE FIRE DEPARTMENT or 911. NEVER PICK UP A BURNING PAN – You May Get Burned. DO NOT USE WATER, including wet dishcloths or towels – a violent steam blast will result.
COMPONENTS OF PACKAGE (Must keep all material for returns or refunds) Range Hood Box {A} {B} {C} {D} {E} {F} {G} KOBE Range Hood Warranty Registration Card Quick Reference Guide 6” Round Plastic Collar x1 Twist on wire Connector Screw Package Filter a. Baffle Filter x2 (for INX28 SQB-700-1 only) b. Honeycomb Filter x2 (for INX28 SQH-700-1 only) {A} {B} {C} {E} {F} {G} {D} a. Baffle Filter b. Honeycomb Filter M4 x 1/2" (4) Optional Liner: INL36211A (Sold Separately) {H} Liner (Model No.
INSTALLATION PLEASE READ ENTIRE INSTRUCTIONS BEFORE PROCEEDING Calculation before Installation To calculate installation, please refer to TABLE 1. (All calculation in inches).
INSERT INSTALLATION Figure 1 Preparation Before Installation NOTE: TO AVOID DAMAGE TO YOUR HOOD, PREVENT DEBRIS FROM ENTERING THE VENT OPENING. Decide the location of the venting pipe from the hood to the outside. Refer to Figure 1. A straight, short vent run will allow the hood to perform more efficiently. Try to avoid as many transitions, elbow, and long run as possible. This may reduce the performance of the hood. Temporarily wire the hood to test for proper operation before installing.
Figure 4 Liner Installation 6. The custom hood frame must have a sturdy base to accommodate the cut-out for the insert. The base must be recessed to accommodate the height of the liner (See liner dimension on Page 13). 7. Secure the liner to the bottom of the base using screws (not included) appropriate for the size and material of your wood frame. 8. Position the liner so that it aligns with the back edge of the custom wood frame. Use a pen to trace the outline of the pre-cut area.
Figure 7 Duct Work Installation 14. Use 6” steel pipe (follow building codes in your area) to connect the ducting on the hood to the ductwork above. Use duct tape to seal and secure joints as shown in Figure 5. 15. Please refer to local codes for the usage of a damper (not included). Hood Preparation Before Installation CAUTION: If moving the cooking range is necessary to install the hood, turn off the power in an electric range at the main electrical box. SHUT OFF THE GAS BEFORE MOVING A GAS RANGE. 16.
OPERATING INSTRUCTIONS Note: For best results, turn fan on prior to any preparation or cooking and keep fans running while cooking. Adjust speed as needed. To operate the fan function Press button to choose the speed. o Q = QuietMode™ speed o L = Low speed o H = High speed Press “OFF” to turn fan off. To operate the light function Press the Light Control to turn lights on and off.
MAINTENANCE For optimal appearance, clean the range hood surface and filters regularly. To Clean Hood Surface CAUTION: NEVER USE ABRASIVE CLEANERS, PADS, OR CLOTHS. ***Regular care will help preserve its fine appearance. 1. Use only mild soap or detergent solutions. Dry surfaces using soft cloth. 2. If hood looks smudged (stainless steel hood), use a stainless steel cleaner to clean the surface of the hood. Avoid getting cleaning solution onto or into the control panel.
SPECIFICATIONS MODEL / SIZE INX2830SQB-700-1 (30”) INX2830SQH-700-1 (30”) COLOR 18-gauge commercial grade stainless steel CONSUMPTION / AMPERE 300W / 2.5A VOLTAGE 120V 60hZ NUMBER OF BLOWER 1 FAN TYPE: CENTRIFUGAL Single Horizontal Squirrel Cage EXHAUST Top 6” Round CONTROLS Mechanical Push Button LIGHTS LED Lights (3W) x 2 HOOD DIMENSION (W x D x H) INX2830SQB-700-1 INX2830SQH-700-1 OPTIONAL ACCESSORIES (W x D x H) 1. 2. 3.
MEASUREMENTS & DIAGRAMS ***All ( ) are in millimeter. ***All inch measurements are converted from millimeters. Inch measurements are estimated. MODEL NO.
***All ( ) are in millimeter. ***All inch measurements are converted from millimeters. Inch measurements are estimated. MODEL NO.
Stainless Steel Liner (Sold Separately) Model No.
PARTS LIST MODEL NO.: INX2830SQB-700-1 (30”) INX2830SQH-700-1 (30”) NO. 1 2 3 4 5 6 7 8 9 10 DESCRIPTION 6” Round Plastic Exhaust Wiring Box Blower System Electronic Component Box LED Light Driver Capacitor x 1PCS Control Switch LED Lights (3W) x2 Baffle Filter x2 Honeycomb Filter x2 MODEL / SIZE INX2830SQB-700-1 INX2830SQH-700-1 PART NO.
MODEL NO.
MODEL NO.
CIRCUIT DIAGRAM MODEL NO.
TROUBLE SHOOTING Issue After Installation, both motors and lights are not working. Lights are working, but motor(s) is not. The range hood is vibrating. The motor is working, but the lights are not working. The range hood is not venting out correctly. Possible Cause The power is not on. The wire connection is not secure. The control panel and processor board wiring are disconnected. The control panel and processor board is defective. The motor(s) is defective. The capacitor(s) is defective.
WARRANTY WARRANTY CERTIFICATE In order to obtain warranty service, you must provide proof of original purchase from a KOBE authorized Dealer. Please keep a copy of your original invoice as proof of purchase. ONE-YEAR LIMITED LABOR WARRANTY ON KOBE BRILLIA SERIES: For one year from the date of your original invoice from a KOBE authorized dealer, we will repair any parts or components free of charge that failed due to manufacturing defects.
THIS WARRANTY WILL BE VOIDED BY: 1. Improper installation and failure to follow installation instructions. 2. Any repair, alteration, modification not authorized by KOBE. 3. Duct alteration, modification and connection. 4. Incorrect electric current, voltage or wiring. 5. Improper usage of the product such as commercial, outdoor or other use besides residential indoor usage. 6. Purchasing this product from an unauthorized KOBE dealer. 7. Damaging the product due to negligence, misuse, abuse, or accident.
WARRANTY INFORMATION FORM Fill in the blanks and keep this paper with the original invoice in a safe place for future service purpose. 1. Date of purchase : _____________________________ 2. Model No. : _____________________________ 3. Serial No. : _____________________________ For warranty service or spare parts purchase in US, contact: KOBE Service Center Email (best): customer.service@koberangehoods.
KOBE Range Hoods 11775 Clark Street Arcadia, CA 91006 USA www.koberangehoods.com This KOBE hood is made for use in the USA and CANADA only. We do not recommend using this hood overseas as the power supply may not be compatible and may violate the electrical code of that country. Using a KOBE hood overseas is at your own risk and will void your warranty. Cette hotte KOBE est fabriquée pour usage aux États-Unis et au Canada seulement.
