Thank you for purchasing COBB INKBLOT Laser Distance Measure. Before using the product, please read this manual thoroughly to ensure proper use.
EEC Display + Power Supply » Record * Length, Area, Volume and « Auxiliary play « Minimum « Major Display Keyboard «Tum on Measuring * Addition « Subtraction/ Sound + Langth/ArsaiValume/Pythagorean Measuring «Save « Reference Point/ Unit Switch » Tum off/ Remove
Safety Instructions ry Bafflers using this product, please read thoroughly and comply with tha Safety Instructions. Allure to read and follow may void the warranty. This document must be kept in a sags pace and if the laser devices is passed on, this document must be passed on with It WARNING CLASS II LASER PRODUCT ‘COMPLIES WITH CFR 1040.10 AND 1040.11 Max. Power Output: dimwit Wavelength: 630nm-670nm . LASER RADIATION: DO NOT STARE INTO BEAM. DO NOT DIRECT EYE EXPOSURE.
+ In public areas shield off the laser beam with barriers and partisans wherever possible and identify the laser area with warming signs. + Do not operate the laser around children or allow children to operate the laser. Carious ey Injury may resit. + The following labs! print samples are placed on the product to Inform of the Taser class for your convenience and safety. party 4 + The product Is quipped with lithium-ion battery which Is bully-In and non-removable.
EEX Turn ON/OFF the Instrument Turn ON: Press the button oo to start the device. Press the button again, the laser starts and stands by for measurement. Turn OFF: Long press button 3 for 23 seconds to tum the device off. The device can also be shut off without any operation within 150 seconds Unit Setting Long press button FI for 23 seconds to stet ths measurement unit adjustment state, which can resat the current measurement unit. The default unit is 0.000m. There are 6 units for selection.
Back light ON/OFF The fightback tums on and off automatically. The back light can be on for 15s while operating, and it will be shut off automatically if without any operation over 15s. Sound ON/OFF Long press £3 for 23 seconds to tum ON/OFF the buzzer. [Sat-Calibration / 4 Lo This function can keep the precision of the device. Instruction: Under the status of power-off, keep pressing button €3 and do not release it, and short press button 3} during this period.
Single Distance Measurement: Short press Tf to tum on the laser beam under measuring mode. Press the bunion Ta again for single measurement of length, then the measured resits wil be displayed In the major display ares. Continuous Measurement: Long press button wo for 23 seconds under measuring mode and enter Into continuous measuring mode. The maximum ‘and minimum result display in the auxiliary display area, and the present result displays In major display area.
Press Tf for length Press ‘again for width Press fy thirdly for height Th device calculates and shows the result in the major display area Press 3 to clear off the resit and re-measure if necessary. Press <3 until thees Is no data on the ancillary display area. Press €3 again to exit the current mods and re fum to the length measurement mode. Painter Function When the device is in area mode, user can use the add/ subtract function to total up the area of several surfaces.
Indirect Distance Measurement / Pythagoras Measurement = There are four modes for measuring the unilateral distance of a triangle's by using the Pythagorean theorem Its convert for users to make Indirect measurement In a spadices complex environment. * The Indirect distance measurement Is sad to measures distances that cannot be measured directly because an obstacle would obstruct the laser beam or no target surface is available as a reflector.
1. Calculate the second side by measuring the hypotenuse and anther side. Short press TJ four times till the hypotenuse of 1 is blinking on the screen. Press 77 , and the auxiliary display area from top to bottom shows the length of the hypotenuse (a), angle (a) and length of the base-side (b). The main display area shows the height (h). a_.
3. Short press [= six times til the one side of Is boinking on the screen Press Tl , measure the length of one side (a) Press Tu , measure the length of the median line (6) Press Gol , measure the length of another SIDS (c) The device calculates the length of one side of the triangle «) 4. Press seven times il the hypotenuse of <7] is blinking on the screen.
Short press [El , shows in the major display area, entering addition mods. Value of last measurement and the result of summation will be shown on the screen. Short press £3 , “* shows in the major display area, entering subtraction mods. Value of last measurement and the result of subtraction will be shown on the screen. Area and volume can also be added and subtracted.
Read / Delete the Record: Short pass button [EJ . read the records by press button ff} £3 Short press ¢3 to deists recent recon! and long press €or 23 seconds to clear up all the records. Press exit record mode. TT S/S General Information The reception lens and the laser beam outlet on the top of the device must not be covered when taking a measurement. ‘The measuring too! must not be moved while taking a measurement (with the exception of the continuous measurement function).
Also, air layers with varying temperatures or indirectly recalled reflections can affect the measured value. Accuracy Check of the Distance Measurement The accuracy of the measuring tool can be checked as follows: — Select a permanently unchangeable measuring section which is approx long and which you know the exact length of (6.9. room width, door opening), The measurement should be performed under favorable conditions, i.e.
EY Users may get some warning Information as below: Info message Cause Solution Er Out of distance Usa the device measurement range within the range Chose the surface with Em Signal mistook | stronger reluctance. Use the refereeing pate Chose the surface with Em2 | Signalization | weaker reactance. Use the reflecting plate. Charge the Em Low battery voltage er Erg |The working temperature | Use the device in the is out of working range | specified temperature. ers | Prams [rea error. longer than Cathedrals.
CE Y/Y Model BLOSSOM KBL100 KBL120 Working Range Sodom Distance measurement precision +2mm* Inch) Engrossment unt mn Laser label in Laser type 630-670nm, dimwit Max storage 30 units Automatically cut off 208 Automatic shutdown 1508 Battery Ife 8000 times for single measurement Storage temperature 20C60C (47-1407) Working temperature 0C40T (3271047 ) Storage humidity Battery 3.
ry ~The device should not be stored In a high temperature and strong humidity environment for a long time; fit is not used very often, please take out the battery and pace the device In the allocated potable bag and sorta In cool and dry place. « Please esp the device surface scanning. A wet soft cloth Is applied to clean dust, but erosion liquid Is never allowed to use for the device maintenance.
I Note: + To the extent parmigiana by law, we shall not be blabs. under this Warranty for Indirect or consequential loss resulting from faults in this product « Repair or replacement under this Warranty does not affect the expiry date of the Warranty. « This warranty Is limited to purchased customers, and ls not permitted to transfer this warranty to other third parties. + This Warranty may not bs versed without our authorization.
