Operating Guide

8
1a. TO INSTALL BATTERY PACK
a. Align the battery pack (not included) with the
battery opening.
b. Insert the battery into the battery opening until the
the battery release button (N) locks into place.
c. Push down on the battery until it locks into place.
You should hear a “click” once it is installed.
1b. TO REMOVE BATTERY PACK
a. Press the battery-release button to release the
battery pack.
b. Pull up on the battery pack to remove it from
the tool.
WARNING
Battery tools are always in operating condition.
Therefore, always turn off the light when the light is
not in use or when carrying the tool at your side.
WARNING
• Do not allow familiarity with this product to make you careless. Remember that a careless fraction
of a second is sufcient to inict serious injury.
• Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
• Deviation from the assembly instruction may result in a risk of re or electric shock.
ASSEMBLY INSTRUCTIONS
1
C
2
A
2. TO INSTALL THE LIGHT HEAD
a. Align the bolt the the hole (on the bracket).
b. Insert the bolt into the hole until it kocks into place
and then tighten them with knobs (A).
c. Do the same operation on the other side.