Use and Care Guide

Air Cap
Air Cap Ring
Horizontal Fan
Vertical Fan
1
2
3
1. Adjust the direction of fan to be either horizontal
or
OPERATING INSTRUCTIONS
2. Set pattern size for desired shape.
9
The paint sprayer will not properly spray unless
the fan direction is either horizontal or vertical.
WARNING
vertical.
To adjust, loosen the air cap ring (J) 90 degrees.
Hand tighten the air cap right (J) after
adjustment (See Figure 1).
3. Before spraying turn the fluid control knob (G)
clockwise until closed. Begin spraying and
slowly adjust the fluid control knob (G)
(See Figure 3).
For full pattern, open pattern control knob (F)
by turning counterclockwise. For a round
pattern, turn pattern control knob (F) clockwise
(See Figure 2).