Use and Care Guide

CARE AND MAINTENANCE

TROUBLESHOOTING

6. Screw on the Fluid Adjustment Knob (E) clockwise.

If you have any questions regarding sprayer performance, please call our Customer Service

Department at 1-888-3KOBALT, 8:00 a.m. – 8:00 p.m., EST, Monday–Friday.

Storage

1. When not using the spray gun, turn the fluid adjustment knob counterclockwise (to open)

which will reduce the spring tension on the needle fluid tip.

2. Store the gun in a secure area and out of the reach of children. When storing for longer than

1 week, add a couple drops of lubricant into the air inlet.

Improper spray pattern

1)One side of air cap

is clogged.

2)Dirt on one side of

fluid nozzle.

1)Loose air cap/dirty seal.

2)One side of air cap

is clogged.

3)Dried material on one

side of fluid nozzle.

Remove air cap and soak in solvent, then

blow air through until clean. Wipe off

nozzle tip using a rag moistened with

thinner. To clean holes, use a broom straw

or toothpick. Never try to detach dried

material with a sharp tool.

1)Tighten air cap.

2)Remove air cap and soak in solvent, then

blow air through until clean. Wipe off fluid

nozzle using a rag moistened with

thinner. To clean holes, use a broom

straw or toothpick. Never try to detach

dried material with a sharp tool.

SPRAY PATTERN/PROBLEM

POSSIBLE REASON SOLUTION

Clockwise