Use and Care Guide
ASSEMBLY INSTRUCTIONS
5
4
6
4. Place 2 - 3 drops of air tool oil (not included)
into the male plug before each use (See Figure
4).
5. Open the claw (D) by turning the chuck (C)
counterclockwise with hand (See Figure 5).
6. Insert a drill bit (not provided) into the claw (D)
and turn the chuck (C) clockwise by hand.
Make sure the drill bit is installed securely and
tightly (See Figure 6).
11
Only use drill bits which have an RPM rating
equal or greater than the tool itself.
Before using tool, always make sure attachments
are properly mounted/secured. If attachments
are not properly mounted/secured, they can
present a serious hazard and may cause bodily
injury for the operator or anyone in or around the
work area. Always follow the attachment
manufacturer's specifications for properly
attaching accessories to tool.
WARNING