Operating Guide

OPERATING INSTRUCTIONS

1. Holding and controlling the pole hedge trimmer

• Always hold the hedge trimmer rmly with both hands on

the handles. Make sure you always have good balance

and secure footing.

• Wrap your ngers and thumbs around the handles. Place

one hand on the front/auxiliary handle and the other on

the rear handle.

2. Starting and stopping the pole hedge trimmer

• Push forward on the safety lock button (J), making sure it

is in the unlocked position.

• Press the lock-off lever (I). Squeeze the trigger switch (R)

to start.

• Release the trigger switch (R) to stop.

Note: To lock out the trigger, you can pull back the safety

lock button (J) with your thumb. To unlock the safety lock,

push it forward. When the trimmer is not in use, you can

use the safety lock to prevent activation during storage or

transport.

3. Adjusting the trimmer head angle

The trimmer head pivots 135° and can be locked into 7

positions within that range.

a. Pull back on the pivot button (N).

b. While pulling the pivot button, move the head forward or

backward.

c. Release the pivot button once the trimmer head is in the

desired position.

d. The trimmer head should lock securely in place.

-45º

0º

90º