How to Guide

CARE AND MAINTENANCE

To promote longer life of the power cleaner:

• Do not run over the hose with vehicles or drag over sharp surfaces, as this could damage the

hose and cause leaks.

• Run clean, fresh water through the kit, then turn off pressure washer and water supply.

• Depressurize by squeezing the gun trigger until all the water has been drained out of the Unit.

• Unit can now be disconnected safely for storage in a cool dark area, or to remove debris from

individual parts.

Keep hose away from hot surfaces (like a mufer). If hose develops a leak, do not try to repair it.

REPLACE THE ENTIRE HOSE. Hose is for cold water pressure washers only. DO NOT use with hot

water or steam service.

WARNING