ITEM #0670252 80 V LITHIUM-ION CORDLESS BLOWER MODEL # KHB 400B Español p. 12 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258) 8 a.m. - 8 p.m., EST, Monday - Friday.
TABLE OF CONTENTS 2 Package Contents................................................................................................................. 3 Symbols................................................................................................................................. 4 Safety Information................................................................................................................. 5 Preparation ...........................................................................
PACKAGE CONTENTS B A PART DESCRIPTION A 80 V Blower B Blower tube 3 QUANTITY 1 1
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the product better and safer. SYMBOLS DESIGNATION V A Hz W min Volts Amperes Hertz Watts Minutes Alternating Current Direct Current /min Per Minute EXPLANATION Voltage Current Frequency (cycles per second) Power Time Type of current Type or a characteristic of current Revolutions, strokes, surface speed, orbits etc., per minute.
SYMBOLS Save these Instructions The following signal words and meanings are intended to explain the levels of risk associated with this product. SYMBOL SIGNAL MEANING DANGER Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.
SAFETY INFORMATION • • • • • • Use extra care when cleaning on stairs. Do not expose to rain. Store indoors. Do not operate in poor lighting. Keep all parts of your body away from any moving part. Wear heavy long pants, boots, and gloves. Avoid loose garments and jewelry that could get caught in moving parts of the machine or its motor. • Do not force tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed.
SAFETY INFORMATION • Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the • • • • • • • • • • • • • • • . Do not crush, drop or damage battery. Do not use a battery or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys.
SAFETY INFORMATION WARNING (Proposition 65) Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contain chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints, • Crystalline silica from bricks and cement and other masonry products, and • Arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of work.
ASSEMBLY INSTRUCTIONS WARNING • • • Replace the battery or the charger immediately if the battery case or charger cord is damaged. Verify that the battery is removed before inspecting, adjusting, or performing maintenance on any part of the blower. Read, understand, and follow the instructions contained in the charger manual. 2. Battery IMPORTANT: The battery is not charged when it 2 E place the battery in the battery charger and charge.
OPERATING INSTRUCTIONS 2. Using the blower • Blow debris or grass clippings off of driveways, sidewalks, patios, parking lots, etc. • Gather grass clippings, straw, or leaves into piles. • Remove debris from corners, around joints, and between bricks. 2 CARE AND MAINTENANCE WARNING adjusting, inspecting, or cleaning the blower. Cleaning • Remove the battery. • Brush or blow dust and debris out of the air vents using compressed air or a vacuum.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Motor fails to start 1. Battery is not secure. when switch trigger is depressed. 2. Battery is not charged. Unit will not start. 1. Defective power switch. Unit will not blow. 1. Blocked tube. CORRECTIVE ACTION 1. To secure the battery, make sure the latch on the top of the battery snaps into place. 2. Charge the battery according to the instructions included with your battery. 1. Return to place of purchase or return the unit to a repair center. 1.
