Use and Care Guide

12
kobalttools.com
OPERATING INSTRUCTIONS
7. Using with Flush Circular Blade
WARNING
• Always wear safety goggles or safety glasses with
side shields during power tool operation. If operation is
dusty, also wear a dust mask.
• Wear protective gloves.
• Use sharp, undamaged blades only. Deformed or blunt
blades or blades that are otherwise damaged can
break.
NOTICE: The protrusion on the drive shaft and the
grooves in the accessory permit the accessories to be
installed around the tool in 30° increments.
WARNING
• Do not attach the ush circular blade facing backward,
as operation in this position may cause serious injury
(Fig. 7a).
The ush circular blade (I) is ideal for making cuts in
wood, plaster, drywall, non-ferrous metals, thin sheet
metal and other materials. The blade works best on
softer woods, such as pine. For harder woods, the blade
life will be limited.
7a
7b