Use and Care Guide

ASSEMBLY INSTRUCTIONS

5. Locking/Unlocking the Saw Arm

When locking and unlocking the saw arm, it is not

necessary to loosen the depth-control knob.

To unlock and raise the saw arm:

a. Firmly grasp the main handle (R) and apply

downward pressure while at the same time

pulling the arm-lock pin (AC) out and away

from the saw housing.

b. Release the arm-lock pin and slowly raise the

saw arm.

To lock the saw arm:

a. Firmly grasp the main handle (R) and apply

downward pressure until head stops.

b. Push in the arm-lock pin (AC) toward the saw, allowing it to lock the saw into place.

NOTE: Do not use saw to cut while it is in the locked position.