Use and Care Guide

10
CARE AND MAINTENANCE
All maintenance should only be carried out by a qualied repair person.
Cleaning
Before cleaning or performing any maintenance, remove the battery from the work light. For
safe and proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean the plastic transparent cover, never use detergent or
alcohol. Always wear safety goggles when cleaning tools with compressed air.
TROUBLESHOOTING
WARNING
• Press the ON/OFF button to switch off the light, and remove battery from the tool before
performing troubleshooting procedures.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
The work light does
not work.
1. Low battery charge. 1. Charge the battery.
2. The light has stopped
working to protect
internal circuits.
2. Turn off the light, wait for the tool
and battery to cool down, then and
start the tool again.
WARRANTY
For 5 years from the date of purchase, the work light is warranted for the original purchaser
to be free from defects in material and workmanship. This guarantee does not cover damage
due to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specic legal rights, and you may also have other rights
that vary from state to state.
Printed in China