Use and Care Guide

12
OPERATING INSTRUCTIONS
Blower Operation
a. Remove ALL dirt and debris found in the tank (E). Install the lter.
b. Turn on the vacuum with the ON/Off switch (J) and begin blower operation.
c. After using, clean up! Dispose of debris properly.
• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow
directly into the center of a pile.
• To reduce sound levels, limit the number of pieces of equipment used at any one time.
• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely
away.