Operating Guide

9
1
OPERATION INSTRUCTIONS
WARNING
Shut off the power source, or disconnect the battery when the power inverter is not in use.
C
1. Insert the battery pack into the power inverter.
2. Connect the plug or USB to the receptacle.
3. Press the power switch (D) to start the power
inverter.
2
B
D
A
BATTERY
OPERATE THE POWER INVERTER
• Align the battery (B) with the cavity in the power
inverter (A).
• Hold the power inverter (A) rmly.
• Insert the battery in the opening until the battery
release button (C) locks into place. You should
hear a “click” once it is installed.
• Press the battery release button (C). This will
cause the battery to raise out of the tool.
• Hold the power inverter (A) rmly. Pull the battery
pack out of the power inverter.
a. To install the battery:
b. To remove the battery: