Operating Guide

7
Your inverter monitors the following potentially hazardous conditions:
OVER TEMPERATURE PROTECTION
– If the temperature inside the inverter is too high, the unit will
automatically shut down. Allow the unit to cool for at least 15 minutes before restarting after a heat-
related shutdown. Unplug unit while cooling.
LOW BATTERY VOLTAGE PROTECTION
– This condition is not harmful to the inverter but could
damage the power source. The inverter automatically shuts down when input voltage drops to 56 volts.
When the condition is corrected, the unit may be restarted.
OVER VOLTAGE PROTECTION
– The inverter will automatically shut down when the input voltage
exceeds 85 volts DC.
OVERLOAD PROTECTION
– The inverter will automatically shut down when the continuous draw
exceeds rated watts.
SHORT CIRCUIT PROTECTION
– The inverter will shut down. Remove the short circuit and restart
the inverter after 5 minutes.
The LED lights indicate the working condition of the power inverter as follows:
Work condition Green Red
Normal
High-voltage protection
Inverter automatically shuts off when the
voltage is too high.
Battery error
Low battery voltage
Short-circuit protection
Red light ashes in intervals of 4.
Overload protection
Low-voltage protection Red light ashes in intervals of 5.
Over temperature protection Red light ashes in intervals of 6.
ON
OFF
BLINKING
PROTECTIVE FEATURES OF THE INVERTER