Operating Guide

4
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better
and safer.
SYMBOLS
SYMBOL DESIGNATION EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
SPM Strokes per minute
The number of back-and-forth strokes the blade makes
per minute
Alternating Current Type of current
Direct Current Type or a characteristic of current
Wet Conditions Alert Do not expose to rain or use in damp locations
Read the Operator’s
Manual
To reduce the risk of injury, user must read and
understand operator’s manual before using this product.
Safety Alert Precautions that involve your safety.
Keep Bystanders
Away
Keep all bystanders at least 50 ft. away.
Wear eye protection
Wear eye protection with side shields that are marked to
comply with ANSI Z87.1 when operating this equipment.
Ricochet
Thrown objects can ricochet and result in personal injury
or property damage.
Sharp Blade
Do not install or use any type of blade on a product
displaying this symbol.
Gloves Wear non-slip, heavy duty gloves.