Operating Guide

kobalttools.com
8
The following precautions should be followed to minimize
kickback:
• 
right hand on the rear handle and your left hand on the


left arm will help you maintain control of the saw if
kickback occurs.
SAFETY INFORMATION
• Make sure that the area in which you are cutting is free
from obstructions. Do not let the nose of the guide bar
contact a log, branch, fence, or any other obstruction
that could be hit while you are operating the saw.
• Always cut with the unit running. Fully squeeze the
trigger switch and maintain cutting speed.
• Use only the replacement guide bars and low

saw.
• With a basic understanding of kickback, you can
reduce or eliminate the element of surprise. Sudden
surprise contributes to accidents.
• Keep proper footing and balance at all times.
• Do not cut above shoulder height or overreach when
cutting.
• Follow the sharpening and maintenance instructions
for the saw chain.