ITEM #0535112 24 IN. TILE CUTTER MODEL #0055311 Français p. 7 Español p. 13 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-3KOBALT (1-888-356-2258), 8 a.m - 8 p.m., EST, Monday - Friday.
PACKAGE CONTENTS PART DESCRIPTION QUANTITY 1 Tile Cutter 1 GENERAL FEATURES Minimum 24 in 60,96 cm 16,9 x 16,9 in 43 x 43 cm 5/8 in 1,6 cm 1 in 2,54 cm Ideal for ceramic tiles, not for high hardness materials such as glass tiles, porcelain and marble. SAFETY INFORMATION Please read and understand this entire manual before using the product. CAUTION Do not move the tool with a tile on it. WARNING Always wear eye protection which complies with current ANSI Standards Z87.1.
OPERATING INSTRUCTIONS 1 2 B A 2. A spare cutting wheel (sold separately, Item #845102 ) can be stored inside the grip handle. 1. Position the extension arms, side rule (release knob A) and angle guide (release knob B) as desired to support stable positioning of tile (not included) for scoring. 3 4 SQUARE CUTTING 3.
OPERATING INSTRUCTIONS 5 6 DIAGONAL CUTTING 5. Align the breaker bar with tile front edge, then press the grip handle. 6. Position the tile at 45°, then, using proper pressure, score the tile one time from rear corner to front corner. 7 8 1 2 8. Cut the tile as shown. 7. Align the breaker bar with tile corner, then press the grip handle.
OPERATING INSTRUCTIONS REPLACING CUTTING WHEEL 9 10 9. Push out the collar pin. The collar pin may require a strong push to be removed. 10. Remove the dulled cutting wheel. 12 11 12. Replace the collar pin. 11. Insert the new cutting wheel.
CARE AND MAINTENANCE 1. Oil should not be used on this tile cutter. Use of oil will cause eventual gumming and sticking of the movable parts as the oil combines with dirt and ceramic tile dust. Use a soft dry cloth to clean the rails after each use. 2. Wear is normal in the rails and can be evenly distributed by occasional rotation of each of the two rails. 3. The only part that will routinely need replacement is the cutting wheel. 4.
