Operating Guide

OPERATING INSTRUCTIONS

2. USING THE CRUISE CONTROL LEVER

This blower is equipped with two cruise control le-

vers, you can adjust the control lever (K) with either

hand for comfort.

• Squeeze the trigger (J) to start the unit.

• Once the unit is on, pull back the cruise control

lever (K) clockwise to increase the speed. This will

lock the speed at the desired setting.

• To decrease the speed, push the cruise control

lever (K) counterclockwise to decrease the speed

to the desired setting.

Note: The trigger will be locked at different levels

based on the position of cruise control lever.

3. USING THE TURBO BUTTON

This blower is equipped with a turbo button (L).

• Squeeze the trigger (J) to start the unit.

• To boost speed, press the turbo button (L) so that the

blower can be operated at the highest speed.

• Once the turbo button (L) is released, the blower will

return to the previous speed.

Note: When operating the blower on turbo speed, the

runtime will be reduced signicantly.

4. OPERATING THE BLOWER

• To keep from scattering debris, blow around the outer edges of a debris pile. Never blow directly

into the center of a pile.

• To reduce sound levels, limit the number of pieces of equipment used at any one time.

• Use rakes and brooms to loosen debris before blowing. In dusty conditions, slightly dampen

surfaces when water is available.

• Conserve water by using power blowers instead of hoses for many lawn and garden applications,

including areas such as gutters, screens, patios, grills, porches, and gardens.

• Watch out for children, pets, open windows, or freshly washed cars, and blow debris safely away.

• After using blowers or other equipment, clean up. Dispose of debris properly.

Note: Never cover air vents. Keep them free of obstructions and debris. They must always remain

clear for proper motor cooling.