Operating Guide

10
OPERATION INSTRUCTIONS
J
ASSEMBLY INSTRUCTIONS
• Align the battery with the cavity in the handle
housing on the blower (A).
• Grasp the trigger handle (H) rmly.
• Insert the battery in the opening until the battery
release button (I) locks into place. You should hear
a “click” once it is installed.
• Press and hold the battery release button (I) with
rm grip.
• Grasp the trigger handle rmly. Pull the battery
pack out of the handle.
Note: The battery ts into the handle snugly in
order to prevent accidental dislodging. It may
require a strong pull to remove it.
a. To install the battery:
b. To remove the battery:
BATTERY
1
• Squeeze the trigger (J) to start the blower.
• To change speed, squeeze the trigger to increase
the speed and release the trigger slightly to
decrease the speed.
• Release the trigger completely to stop the blower.
1. STARTING/STOPPING THE BLOWER
I
H
2