Brochure

SOCKET STRIPS
7.40
DI-STRIP
®
Surge Protector
Standard USA NEMA5-15R
- With light switch
- With overload protection 15A
- With overvoltage protection
- 19” installation option
- Cable: SJT 14 AWG x 3C
- Moulded plug, NEMA5-15P
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Dimensions
Socket spacing: 32 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CSA NRTL/C
- CB-scheme
Colour
Casing: RAL 7035 light-grey
Plastic parts: RAL 7021 dark-grey
Socket parts and cable: RAL 9011,
graphite black
Technical data
Mains voltage, 125 Vac
Nominal current 15 A
Surge current resistance (8/20 μs wave):
max. 8 kA
Protection level: ‹ 800 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting bracket
DOS20017
With overvoltage protection
L S n F1 F2 19” Safe Model Order no. UP
483
•
6
••
With switch 03.534.006.1 1 unit
DOS00687
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003
Remote PDU, IEC 320
Feed, 16/32 A
DOS80002
IP Ready
• Web Interface
• IPMI 2.0 Interface
• SMASH CLI Interface
• SNMP alarm signalling and SNMP MIB
• Controls with the Raritan Command
Center Secure Gateway
Supervision and control
• All outputs can be controlled remote and
local
• Power, current, voltage
• RMS power and RMS current
• “History” safety function
• Modern fuse systems
• Alarm and trap signals to
different destinations
• AES 256 hardware
• User authentication via LDAP, MSAD,
CCSG
• SSH CLI
Monitoring
• Internal temperature sensor
• “Feature bus” (RS 485 + single wire)
for external sensors
Power metering
• Max. load rating: 30A, 7200 W
• Available measured variables per
out put:
- Average power consumption
- Real power effective value
- Voltage effective value
- Current effective value
- Apparent power
• The maximum actual value present is
saved and can be also be deleted
• All measurement results can be retrieved
via IPMI, SNMP, DES SMASH CLI or HTML
interface
• HTML interface for visualising data
history
Power control
• Each connection can be controlled
separately
• Programmable switch-on delay:
User-definable
• Outputs can be programmed in
virtual groups
• Groups can be defined and real
connections can be assigned
to groups
• All outputs can communicate with IPMI,
SNMP, SMASH CLI and HTML interface
protocols
• 2 fuses per output and group
• Adjustable tripping current