Brochure

SOCKET STRIPS
7.30
DI-STRIP
®
Safety Basic
Standard CEE 7 V (UTE) / France
- For protecting against transient overvoltages
from the mains, which, for example, are
caused by switching machines on and off.
- With critical overvoltages the mains is sepa-
rated.
- Once the safety arrester has been triggered
the green function display goes out. The
socket strip can then no longer be used.
Send the socket strip to the manufacturer
for the safety arrester to be replaced!
The safety effect of the type 3 test category
and requirements category “D” is to protect
the equipment, i.e. precision protection.
The protection devices of the test and require-
ments categories 1 and 2 and B and C must be
preconnected in the building installation to
ensure optimum protection.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm
2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour
Final digit of order number .1:
RAL 7035 light-grey
Technical data
Test category: Type 3
- In acc. with DIN EN 61643-11
Feature class: D
- In acc. with VDE 0675-6
Mains voltage: 230 VAC
Nominal current: max. 16 A
Cut-off discharge current (8/20 ?s): 10 kA
Reaction time: ‹ 25 ns
Protection level
(with 100 A varistor peak current):
- L with respect to N: ‹ 800 V
- L/N with respect to PE: ‹ 1500 V
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20032
DOS20031
L S n F1 F2 19” Safe Model Order no. UP
732 10
••
03.416.110.1 1 unit
683 10
••
03.416.010.1 1 unit
532 6
••
03.416.106.1 1 unit
483 6
•••
03.416.006.1 1 unit
432 4
••
03.416.104.1 1 unit
383 4
••
03.416.004.1 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003