Brochure

7.29
SOCKET STRIPS
DI-STRIP
®
Protector Emergency Stop FI / LS
Standard CEE 7 V (UTE) / France
- With 2-pole emergency stop switch for user
protection
- For protecting operating personnel
- For manual emergency switch-off
of connected equipment
- Phase and neutral conductors are safely
separated
- Switch must be specifically unlocked to
restart
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm
2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing:
Compact: 50 mm
Height: 101 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combinations
Final digit of order number .1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Additional:
With 2-pole fault current switch and cir-
cuit breaker
Provides a combination of user, overload
and short circuit protection
Load rating
100-240Vac/16 A
Supply schedule
1 socket strip
2 mounting brackets
DI-STRIP
®
Power Cleaner
Standard CEE 7 V (UTE) / France
- High-frequency glitches are generally caused
by switching processes in an operation from
100 kHz to 5MHz. This high-frequency rate
overloads the mains frequency and affects ad-
jacent electronic equipment. The mains filter
attenuates this high-frequency rate.
- The attenuation behaviour is harmonized with
the typical interference spectrum.
- The mains filter works in both directions.
This means that glitches from the equip-
ment to the socket strips are therefore also
kept away from the mains.
- 19” installation option (with length 483 mm)
- Socket rotation: 45°
- Cable: H05VV-F 3G 1.5 mm
2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
Colour combination
Final digit of order number .1:
RAL 7035 light-grey
Final digit of order number 0.6:
Casing, RAL 2003, pastel orange
Plastic parts: RAL 7035 light-grey
Load rating
Nominal voltage: max. 250 Vac, 50 Hz
Nominal current: max. 16 A
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DOS20029
DOS20030
With emergency Off switch
and FI-/ LS circuit breaker
With mains filter
L S n F1 F2 19” Safe Model Order no. UP
683 8
••
03.428.008.1 1 unit
L S n F1 F2 19” Safe Model Order no. UP
883 13
••
03.412.013.x 1 unit
683 9
••
03.412.009.x 1 unit
483 5
•••
03.412.005.x 1 unit
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003