Brochure

SOCKET STRIPS
7.16
DOS20070
DOS00268
With master-slave module
With master-slave module
- If the master equipment is switched, the
slave sockets are also switched (together,
with a short delay to the master). Enables
easy switching on and off of several difficult
to access pieces of equipment. Switching
thresholds can be set from outside via po-
tentiometer.
- Note:
- Power consumption of the master equip-
ment must be constantly over the switch-
ing-on threshold. When switching off the
master equipment, the power consumption
must fall below the switching-off thresh-
old.
- 19” installation option (with length 483
mm)
- Socket rotation: 45°
- Cable: HO5VV-F 3G 1.5 mm
2
- Moulded right angle plug
Material / Finish
Casing: closed sheet steel extrusion, zinc-
plated, powder-coated texture
Plastic parts: Vampamid 6 0024 VO (UL94),
recyclable
Internal conductor: full-length busbar,
brass
Dimensions
Socket spacing: 50 mm
Height: 45.5 mm
Casing width: 44.4 mm (= 1 HU)
Cable: 2.5 m
Approvals
- CE Label in accordance with low voltage
directive 2006/95/EEC
EMC Directive 2006/108/EEC
- Innova-GS
- CB-scheme
- VDE
Colour combination
Final digit of order number 1:
RAL 7035 light-grey
Plastic parts: RAL 7035 light-grey
Load rating
Max. 250 Vac/16 A
Technical data
Threshold setting range
On: 20 mA - 200 mA (approx. 55 mA, sup-
ply status)
Off: 16 mA - 160 mA (approx. 44 mA, sup-
ply status)
Switching delay 550 ms ±/-20 %
Electronic module, 2-pole switching
Supply schedule
1 socket strip
2 mounting brackets
2 19” mounting brackets (additional with
19” installation option)
DI-STRIP
®
Master-Slave
Standard DIN 49 440
L S n F1 F2 19” Safe Model Order no. UP
683 9
•
03.314.009.1 1 unit
483 5
••
03.314.005.1 1 unit
See also: The current
Telecom Special Catalogue!
Where you will find more products:
• Indoor 19” rack systems
• Outdoor 19” rack systems
• Free-standing and wall cabinets
• Power supply systems
• Thermal management
Dimensions in mm: L = Length, S = Switch, n = Number of sockets,
F1 = Standard side, F2 = Design side, 19”= Suitable for 19” installation, Safe =
Child-safe, HU = Standard height unit, UP = Unit of packaging
= Express item
Conversion: 1 mm = 0.03937 inch 1 kg = 2.2046 pound
Replace .x with the number of the required colour combination:
.1 = RAL 7035, .6 = RAL 7035/RAL 2003