Quick Start Guide

QuickStartGuideforNB-IoTWirelessDataTerminal--KDCSeries

V1.0

（

2018.5.9

）

KnowyouTechnologiesCo.,Ltd.

step 1: use the needle to insert the hole of sim card slot, then pup out sim card tray and pull out sim card tray.

step 2: put the data card on the sim card tray correctly and insert them into sim card slot horizontally.

step 3: upturn the chip of data card and insert it into NB terminal.

step 4: connect the antenna to NB terminal and tighten clockwise to fix it on the NB terminal.

step 5: connect NB-IoT wireless data terminal to laptop, Make sure the minimum distance to the human body is 20cm.

step 6: open software.