User's Manual
Installing Batteries
Main Unit:
1. Flip over unit and find battery door under belt clip
2. Open door and position 2 AAA batteries as indicated
by the diagram in the battery compartment.
3. Close battery compartment.
4. Press the main POWER button to turn the main unit ON.
5. When changing batteries, be sure to turn off power to both the main unit and the
radio before removing batteries.
Transmitter Belt:
Your transmitter belt comes assembled with a battery. When your transmitter belt no
longer picks up any signals, you will need to replace the battery.
1. Following the diagram below, remove the
conductive transmitter pad from the center
of the belt. (Fig. A, # 1 )
2. Using a micro Phillips head screwdriver remove the
metal plate battery door. (Fig. A, # 2 )
3. Remove the old 12V battery (VR22/L1028/A23) and
insert a new battery, as indicated.
4. Replace the metal plate battery door and then
reattach the conductive transmitter pad on top.
7
Fig. A