User's Manual
Calibrating your Pedometer:
1. Position the pedometer SENSITIVITY
SWITCH located on the back of the main
unit to the center position. (Fig. N)
2. Fasten pedometer to your belt or arm.
3. Reset the step count to 0.
4. Walk several steps (10-20) and count them.
5. Check whether the pedometer has counted
the same number of steps as you. If so, the
setting is correct and you are ready to get
moving.
6. If your step count does not agree with the pedometer step count, adjust the
SENSITIVITY SWITCH and repeat steps 2 through 5 at the new setting. If the
pedometer step count is less than your count, move the switch toward the left on
the back of the unit (+) for a more sensitive setting. If the pedometer step count is
higher than your count, move the switch toward the right of the unit (-) for a less
sensitive setting.
NOTE:
• This calibration is important to ensure that your actual distance will be calculated
correctly.
• When changing the location of the pedometer between your arm and your waist, the
unit needs to be re-calibrated for the new position.
13
Fig. N