User's Manual

Radio Play
Using your thumb, press the radio VOLUME button firmly in the center to switch ON
your radio. Pressing the VOLUME button firmly again will shut the radio OFF. Note:
You can use your radio without the other features, should you choose.
Press SCROLL UP or DOWN to advance through stations 0.1 at a time.
Press SCROLL and hold for 2 seconds to auto scan through stations. The radio will
then scan until it reaches a station. (Note: To use the scan feature, your headphones
must be plugged into the main unit.)
Pressing BASS+ button on the top edge of your unit adds a pumping bass for your
listening pleasure.
Note: When the radio and main unit are OFF, the screen will only display the clock feature.
Setting Pre-Set Stations
From the default screen press SELECT to get to your first pre-set,
identified as FM1. This unit has the capacity to store nine FM
preset stations, FM1-9.
Press and hold MODE button for 3 seconds and FM1 will start to flash. (Fig. I)
SCROLL UP or DOWN to find a station. (Auto scan can be used as well if desired.)
Once a station is identified, press SELECT. This will confirm the station as a pre-set.
Repeat process as desired to set FM2FM9.
10
Fig. I