User's Manual

Make sure the transmitter belt is right side up
before securing the second side. (Fig. F)
Insert the hook from the underside of the
transmitter belt and secure in place. (Fig. G)
Using the Armband
1. Turn main unit over so that the battery door is facing you.
2. Insert coiled end of the armband strap with the velcro side facing the
fitness tracker. Begin from the right side starting underneath the strap hole.
3. Feed the velcro coiled strap over the belt clip toward the left.
4. Insert the velcro coiled strap through the left strap hole and allow it to feed
underneath the left side.
5. Position on arm and adjust the velcro coil around the arm.
6. Pull the elastic strap firmly until it meets the velcro. Secure on arm.
Default Screen
If no buttons are pressed for 10 seconds, at
any time during use the Monitor will return to
the default screen. (Fig. H)
9
Fig. F
Fig. G
Radio
Clock
Fig. H