Safety data sheet

Safety Data Sheet
according to Regulation (EC) No. 1907/2006 (REACH)
Trade name :
Hakupur 50-538-1 (00013505381)
universal cleaning agent
Revision date :
05.02.2013
Version (Revision) :
9.0.0 (8.0.0)
Date of print :
06.02.2013
Page : 4 / 8
( EN / D )
equipped (spark
-
free) tools. Wear anti
-
static footwear and clothing Take precautionary measures against static
discharges.
Measures to prevent aerosol and dust generation
Vapours/aerosols should be exhausted directly at the point of origin. Use only in well
-
ventilated areas.
Environmental precautions
Shafts and sewers must be protected from entry of the product.
7.2
Conditions for safe storage, including any incompatibilities
Hints on storage assembly
Storage class :
3
7.3
Specific end use(s)
None
8. Exposure controls/personal protection
8.1
Control parameters
Occupational exposure limit values
ETHANOL ; CAS No. : 64
-
17
-
5
Limit value type (country of origin) :
TRGS 900 ( D )
Limit value :
500 ppm
/
960 mg/m
3
Peak limitation :
2(II)
Remark :
Y
Version :
02.07.2009
8.2
Exposure controls
Personal protective equipment
Eye / face protection
Eye glasses with side protection
Skin protection
Hand protection
Suitable gloves type
: Gloves with long cuffs
Suitable material
: Butyl caoutchouc (butyl rubber)
Breakthrough time (maximum wearing time)
: >=
480
min
Thickness of the glove material
: 0,5
mm
Recommended glove articles
: DIN EN 374
Additional hand protection measures
: Check leak tightness / impermeability prior to use. Do not wear gloves
near rotary machines and tools. In the case of wanting to use the gloves again, clean them before taking off and air
them well.
Remark
: The quality of the protective gloves
resistant to chemicals must be chosen as a function of the specific
working place concentration and quantity of hazardous substances. For special purposes, it is recommended to
check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these
gloves.
Body protection
lab coat Overall.