User's Manual

34
4.1 Selecting an Aspect Ratio
Press the aspect ratio ( ) button to select the appropriate aspect ratio for the type of program material being
viewed.
4.2 Selecting An Input Source
When you turn on the LED1081, it switches to the last selected
input and looks for a valid signal.
Use these buttons on the remote control to select an input source
directly.
4.3 Using the On-Screen Menus
Press the MENU button on the remote control or system keypad to display the Main Menu.
There are five menus. Press
or to select a sub-menu.
Press
or to select a sub-menu item.
For each sub-menu item, the currently-selected value is highlighted.
Press
or to choose a setting for that item, or press ENTER to go to another sub-menu.
Press MENU to return to the previous menu.
From the Main Menu, press MENU to turn off the OSD menu.
The LED1081 OSD menus are arranged hierarchically, as shown in Figure 4-1.
Note

available.
1.
2.
3.
4.
5.
6.
4
operaTion