User's Manual

23
V i deo Standard: When this feature is set to Auto, the projector attempts to automatically pick
the video standard based on the input signal it receives. (The video standard options may vary
depending on your region of the world.) If the projector is unable to detect the correct standard,
the colors may not look right or the image may appear “torn.” If this happens, manually select a
video standard by selecting NTSC, PAL, or SECAM from the Video Standard menu.
Closed Captions: Controls closed caption display while audio is not muted. If this setting is not
off, and audio is not muted, and the source is NTSC and contains captions on the selected
channel, then the projector must display caption text overlaid on the image.
Ceiling Mount: Turns the image upside down for ceiling-mounted projection.
Rear Pr o j ec t : Reverses the image so you can project from behind a translucent screen.
Prevent PC Screen Saver: Prevents your computer from going into Screen Save mode. The
projector must be connected to the PC via a USB cable for this feature to work.
Search Screen: Allows you to display one of the following options instead of the default screen at
startup, and when no source is detected. Options include the factory logo screen, a custom
Snapshot, or a blue, black or white screen.
Take Snapshot : Captures the current image and allows it to be used as the search screen
image.
Disable Snapshot: Allows the user to disable the snapshot capability.
Show Messages : Displays status messages (such as “Searching”) in the lower- left corner of the
screen.
Menu Offset: Allows you to change the position of the On Screen Display items.
Menu Transparency: Allows you to change how much of the projected image behind the menu
you can see. As the value increases, more of the image behind the menu is visible.
Magnify Controls: Allows you to change the function of the arrow buttons when the menu is not
shown. By default, the arrow buttons allow you to advance slides while in PowerPoint‟s
SlideShow mode. To make the arrow buttons also adjust magnify settings, choose Magnify
Controls to turn magnify controls on. Now when the menu is not shown, you can press the Select
button to switch between the magnification settings (Magnify Level, Magnify Horizontal Position
and Magnify Vertical Position), then press Select again to turn off magnify controls and use the
arrow buttons to advance slides.
Keypad Enable : Enables or disables keypad.
Glow Ring : Controls the brightness level of the glow ring status indicator.
Serial Port, Baud Rate: Selects the serial port and baud rate.
Serial Port Echo: Controls whether the serial port echoes characters.
Status and Service menu
Source Info: Displays current source settings (read-only).
Projector Info: Displays current projector settings (read-only).
Reset Lamp Hours: Resets the lamp hours used counter in
the Projector Info menu to zero. Do this only after changing
the lamp.
Factory Reset: Restores all settings to their default.
Service Code: Only used by authorized service personnel.