User's Manual

22
Setup menu
Language : Allows you to select a language for the onscreen display.
Key Click: Turns the key click sound on or off. When this setting is on, pressing keys on the
keypad causes the projector‟s speaker to play a “click” sound.
Custom Key : Allows you to assign a different function to the Custom button, allowing you to
quickly and easily use the effect. Highlight an effect and press Select to choose a different one.
• Source Info: The default action. Shows the Source Info menu.
• Projector Info: Shows the Projector Info menu.
• Aspect Ratio: Sets the ratio of image width to image height.
• Auto Image: Resynchronizes the projector to the source.
• Overscan: Removes noise around the image.
• Blank Screen: Displays an empty screen.
• Freeze Screen: Pauses the projected image.
• Source: Cycles through available sources.
• Closed Caption: Enables or disables Closed Captioning.
• SplitScreen: Enables or disables SplitScreen. Before using this for the first time, configure
SplitScreen sources and layouts using the SplitScreen menu
Source Key Enable : Enables or disables Source Keys on the
optional
Commander-2 remote.
AC Power On: When this feature is on, the projector
automatically turns on when electrical power is connected. This
allows control of ceiling mounted projectors with a wall power
switch.
Auto Off Time: Automatically turns the projector off after no
signals are detected for a preset number of minutes. If an active
signal is received before the projector powers down, the image
will be displayed.
Screen Save T i me: Automatically blanks the screen with a black color after no signals are
detected for a preset number of minutes. The image returns when an active source is detected or
a remote or keypad button is pressed.
Sleep Timer: Allows the projector to automatically power off after it has been on for a specified
amount of time.
Always-On Functions: Allows you to control which projector functions will work even when the
projector is in standby (powered off but connected to AC Power). Press Up or Down to highlight
the function you want to change, then press select or left and right to change the function to
either Yes or No. Press menu when done. Note that some functions must always have the
same value; in this case when you change one value, other values in the submenu may also
change automatically.
Lamp High Power: Toggles between on and off. Turn it on to raise the light output of the lamp.
This also raises the fan speed, making the projector louder. Default is off.
Power Sounds: Controls whether the projector makes a sound when powered on & off.
Auto Source: When this feature is on, the projector automatically finds the active source,
checking the selected Power-up Source first. When this feature is off, the projector defaults to
the source selected in Power-up Source. To display another source, you must manually select
one by pressing the Source button on the remote or keypad.
Power-up Source: Determines which source the projector checks first for active video
during power-up.
HDMI DDC: When this feature is set to on, the projector will support and older DVD player for
HDMI port.
Fast Color Refresh: Changes the color wheel speed from 4x to 6x.