Quick Start Guide

Warranty terms:
The light* is guaranteed for 2 years against manufacturing defects only. The battery is guaranteed for 6 months against manufacturing
defects only. Any damage arising from misuse, accident, normal wear and tear or negligence is not covered. Disassembly of product and/
or attempted repair by anyone other than a Knog technician will void the warranty. Claims made for repair or replacement of the light for
manufacturing defects will be honoured upon return of product to point of purchase along with original receipt dated within two years from
the original date of purchase only.
Knog assumes no liability for any accident, injury, death, loss or other claim related to or resulting from the use of this product. In no event
shall Knog be liable for incidental or consequential damages relating to or resulting from the use of this product or any of its parts.
*Note: not including the battery
Warnings:
Use only with approved USB charging devices.
Do not dispose of product in fire or expose to extreme heat.
Do not attempt to disassemble product.
Improper care and treatment of the light will void warranty.
Not to be used for personal night vision or safety lighting. Designed specifically for providing illumination for video and photographic
activities only.
Disclaimer and more information:
All information is correct at time of printing. Specifications are subject to change without notice. Please visit knog.com.au
for more information and updates.
Run time variations:
[expose] smart runtimes are based on tests carried out at room temperature. The light will operate best between 10
o
C (50
o
F) and 35
o
C
(95
o
F). In temperatures below this range, the runtime will reduce further. LiPo batteries have a chemistry that is vulnerable to environment
and temperature, therefore runtimes will vary depending on these prevailing conditions.
Handling the device
Never pick up your iPhone by holding onto [expose] smart. While the
connectors provide a secure fit to the iPhone during normal use, they are not
designed to support the weight of the phone itself.
After use
Remove the device from the mobile phone after use. This device is not a mobile
phone accessory.
Storage mode
Storage mode optimizes battery longevity. Utilize storage mode when lights are
not used for more than a fortnight.
1. Fully charge the light until the Low Battery Indicator (L.B.I.) LED turns green
2. Remove from power source
3. Hold the button down for 5 seconds until the L.B.I. LED turns red
The main LEDs will stay on and the light will ‘drain’ itself to the optimum voltage
level. The main LEDs will flash several times just before turning o, signalling
storage mode completion.
After storage, recharge the battery to full before use.
Button L.B.I. LED
English
Page 3 / 4
PRODUCT MAINTENANCE
APP ICONS
Adjustments
Modes
Flash
Photo Mode
Constant
Strobe
Video Mode
White balance
Constant
Light brightness
WB
[ ]
Format Other
Standard
Front / Back camera
Grid overlay Device Connect
Square cropZoom (pinch screen)
Library