Datasheet

Four-Mandrel Crimping Pliers
for turned contacts
97
52
> for crimping turned contacts
> fourmandrel crimping for topquality crimping connections
> mandrel gauge to check the basic setting
> repetitive, high crimping quality due to integral lock
(selfreleasing mechanism)
> optimum transmission of force due to highly effective lever
action for fatiguereduced operation
> high operation comfort thanks to handy shape
> Chrome vanadium electric steel in special quality, oilhardened
97 52 63
fine adjustment of pressure depending on the conductor‘s diameter by means of
adjusting wheel; pliers in a plastic case with foam insert and standard locator for
precise positioning of the contacts
97 52 63 DG
crimping capacity can be adjusted in increments of 001 mm; with digital display of
the preset crimping capacities and possibility of recalibration via RESET function with
electronic wear monitoring; adjustment in mm, inches or comparable selection positions
according to MIL; pliers in a plastic case with foam insert and standard locator for
precise positioning of the contacts
97 52 64
pressure adjustment depending on the conductor‘s diameter by means of adjusting
wheel in  different positions; locator for positioning the contacts
97 52 65
fine adjustment of pressure depending on the conductor‘s diameter by means of
adjusting wheel; locator for positioning the contacts; with table for calculating the
settings; pliers in a plastic case with foam insert
97 52 65 A
fine adjustment of pressure depending on the conductor‘s diameter by means of
adjusting wheel; with table for calculating the settings; pliers in a plastic case with
foam insert
97 52 65 DG
crimping capacity can be adjusted in increments of 001 mm; with digital display of
the preset crimping capacities and possibility of recalibration via RESET function with
electronic wear monitoring; adjustment in mm, inches or comparable selection positions
according to MIL; with table for calculating the settings; pliers in a plastic case with
foam insert and standard locator for precise positioning of the contacts
97 52 65 DG A
crimping capacity can be adjusted in increments of 001 mm; with digital display of
the preset crimping capacities and possibility of recalibration via RESET function with
electronic wear monitoring; adjustment in mm, inches or comparable selection positions
according to MIL; with table for calculating the settings; pliers in a plastic case with
foam insert; without locator
97 59 65 2
universal locator for holding turned contacts for crimping; precisely adjustable to the
length (20  5 mm) and diameter (1  8 mm) of the crimping connector; locator that
is universally adjustable (in length and diameter) for the repeatable exact alignment
of turned contacts in crimping pliers; can be set to all commercially available turned
contacts in the fourmandrel crimping pliers’ capacity range
Turned contacts are used for particularly demanding plug-type
connections, e.g. in medical industry and aeronautics.
'ZVTGOGN[TGNKCDNGETKORKPIEQPPGEVKQPUECPDGCEJKGXGFQPN[YKVJ
pliers that work with absolute precision and maintain the required
crimping depth in the 1/100 mm range.
97 59 65 2
Universal Locator
97 52 64
97 52 65
97 52 65 DG
97 52 63 DG
180
CRIMPING PLIERS