Datasheet

99
95
95 31 250
95 36 250
95 31 280
95 31 280: large cutting capacity:
maximum 52 mm dia. / 380 mm
2
Ratchet principle and two-stage ratchet
drive for easier cutting.
Article-No.
9
EAN-
9
Head
9
Handles
9
Cutting capacity �
Length Code
mm 4003773- ø mm mm
2
MCM g
95 31 250 043935 lacquered with two-colour 32 240 500 575
280 043942 dual component handles 52 380 750 750
95 36 250 026884 lacquered insulated with two-colour 32 240 500 560
280 026891 dual component handles 52 380 750 735
VDE-tested
95 39 250 022244 spare moving blade 130
95 39 280 025283 spare moving blade 260
� for cutting copper and
aluminium cables, single
and multiple wire
� not suitable for steel wire
and wire ropes
� precision ground, hardened
blades
� clean and smooth cut without
crushing and deformation
� one-hand operation using
ratchet principle
� little handforce required due to
optimum transmission ratio
� two-stage ratchet drive for
easy cutting
� simple handling as a result of
low weight and compact
design - can be used even in
confined areas
� with guard
� special grade tool steel
Models 95 31 250/280:
� fixed handle with support area
for putting down the plier
when cutting
Models 95 31/36 280:
� suitable for aluminium sector
cable up to 4 x 150 mm
2
95 Cable Cutters, Ratchet Action
patented
Cutting thicker cables usually
requires a high handforce.
KNIPEX Ratchet Cable
Cutters facilitate this work
by means of a two-stage
ratchet drive and a handle
with support (model 95 31).
The cable cutter can be
rested on a solid ground so
that additional body weight
can be applied to lower arm
musculature fatigue.