Datasheet

KNIPEX Quality – Made in Germany

INNOVATION 2012

KNIPEX

Cable Cutter

easy handling due to low weight (800 g) and compact construction (320 mm length) – usable in confined areas also

cutting through copper and aluminium cables with diameters of up to 60 mm in one-hand and two-hand operation

hardened cutting edges, precisely ground, cut smoothly and neatly without crushing

for cutting copper and aluminium single conductors as well as multiple stranded cables

(not suitable for steel wire and wire ropes)

innovative three-stage ratchet-drive with high leverage for easy cutting in one-hand and two-hand operation

fixed handle with support area for putting down the pliers when cutting

High-grade special tool steel, forged, oil-hardened

First manual ratchet-action

cable cutter for one-hand and

two-hand operation for cutting

through copper and aluminium

cables with diameters of up to

60 mm!

Sturdy. Easy to use. Stable.

Innovative ratchet-drive.

For cable up to 60 mm diameter

PAGE 1
INNOVATION 2012 -action ratchet nd and l a u n a First m er for one-ha tting utt n for cu m io cable c t a r e miniu nd op two-ha opper and alu p to c h o rs f u throug iamete d h it w cables 60 mm! KNIPEX Cable Cutter Sturdy. Easy to use. Stable. Innovative ratchet-drive. For cable up to 60 mm diameter.
PAGE 2
INNOVATION 2012 Sturdy. Easy to use. Stable. The ﬁrst manual ratchet-action cable cutter for one-hand and two-hand operation for cutting copper and aluminium cables with diameters of up to 60 mm! Thick cables are cut everywhere, in wind turbines, transformer stations and cable trenches etc. Heavy electrically operated systems are often used for this purpose.