Datasheet

Cable Cutters
(ratchet action)
95
3
> for cutting copper and aluminium single conductors as well
as multiple stranded cables
> not suitable for steel wire and wire ropes
> precision ground, hardened blades
> clean and smooth cut without crushing and deformation
> onehand operation using ratchet principle
> little handforce required due to very high transmission ratio
> twostage ratchet drive for easy cutting
> simple handling as a result of low weight and compact design –
can be used even in confined areas
> guard prevents operators‘ fingers being pinched
> Highgrade special tool steel, forged, oilhardened
95 31 280 / 95 36 280
suitable for aluminium sector cable up to  x 150 mm²
95 31 280: Large cutting capacity:
max 52 mm dia / 380 mm²
Ratchet principle and twostage ratchet
drive for easier cutting
95 31 250/280: fixed handle with support area as an aid to position the cutters on a flat surface
Cutting capacities
Article No
EAN
003773
mm Tool Handles Ø mm mm² MCM g
95 31 250 03935 250
black lacquered with multicomponent grips 32 20 500 676
95 31 280 0392 280
black lacquered with multicomponent grips
52 380 750 860
95 36 250 02688 250 black lacquered
insulated with multicomponent grips,
VDEtested
32 20 500 652
95 36 280 026891 280
black lacquered
insulated with multicomponent grips,
VDEtested
52 380 750 835
95 39 250 0222 Movable spare blade for 95 31 250 / 95 36 250
95 39 280 025283 Movable spare blade for 95 31 280 / 95 36 280
Product video
95 36 250
Product video
95 36 280
95 31 250
95 31 280
95 36 250
158
CABLE AND WIRE ROPE SHEARS