Datasheet
Cable Shears 95
>
for cutting copper and aluminium single conductors as well
as multiple stranded cables
>
not suitable for steel wire and hard drawn copper conductors
>
precision ground, hardened blades
>
clean and smooth cut without crushing and deformation
>
easy cutting with onehand operation
>
guard prevents operators‘ fingers being pinched
>
adjustable bolted joint, selfretaining screw
>
Highgrade special tool steel, forged, oilhardened
Style 2
internal opening spring, protected and captive
Style 4
multifunctional tool for working on NYM cable from 3 x 15 mm² to 5 x 25 mm²
(cutting, stripping insulation); universal stripping area for both solid conductor
crosssections; reliable alignment of the cable in the stripping area due to Vshaped
blade geometry
95 12 165 T*
Pliers with tether attachment point for mounting a fall protection
Cut performed with a Diagonal Cutter: high effort
required, inaccurate cut, considerable deforming
and crushing of the cable
Cut performed with a Cable Shear: easy, clean
cut without any deformation of the cable
95 1 165: with stripping function The locking device keeps shears with spring
inside the joint closed
Cutting capacities
Article No
EAN
003773
mm Style Tool Handles Ø mm mm² AWG g
95 11 165 00323 165
1 burnished plastic coated 15 50 1/0 215
95 12 165 029182 165
1 burnished with multicomponent grips 15 50 1/0 250
95 12 165 T 080190 165
1 burnished
with multicomponent grips and
integrated tether attachment point
15 50 1/0 25
95 16 165 03968 165
1
chrome
plated
insulated with multicomponent grips,
VDEtested
15 50 1/0 262
95 21 165 069805 165
2 burnished plastic coated 15 50 1/0 215
95 22 165 069812 165
2 burnished with multicomponent grips 15 50 1/0 25
95 26 165 069980 165
2
chrome
plated
insulated with multicomponent grips,
VDEtested
15 50 1/0 275
95 41 165 078609 165
burnished plastic coated 12 35 1/0 220
* Other tools with tethering can be found from page 25 ff
95 11 165
95 12 165
95 16 165
95 22 165
95 12 165 T
95 41 165
154
CABLE AND WIRE ROPE SHEARS