Datasheet

Punch Lock Riveters
90
4
> to join metal section sheets used in dry walling with a lock seam
> for U and Cshaped sections with max 12 mm metal (2 x 06 mm)
> minimum handforce required due to optimum lever transmission
> pliers body: special tool steel, rolled, oilhardened
90 42 250
for onehand operation
Setting the pliers for connection of two
metal section sheets
The punching tool is squeezed through the
metal section sheets
Sheet Metal Nibbler
90
55
Notching and chip breaking in a single pass Notching without chip breaking
90 42 250
90 42 340
90 55 280
Article No
EAN
003773 mm Pliers Handles Capacity g
90 42 250 07865 250 burnished with multicomponent grips max 12 (2 x 06) 676
90 42 340 07188 30
burnished with multicomponent grips
max 12 (2 x 06) 901
90 49 340 028079 Spare punch for 90 2 30
90 49 340 M 02899 Spare punch for 90 2 30
Article No
EAN
003773 mm Tool Handles g
90 55 280 026730 280
nickel plated with multicomponent grips 61
90 59 280 027355 Spare blade fo 90 55 280
> for cutting iron, copper or aluminium sheet metal up to
max 12 mm thickness, plastic up to max 20 mm thickness
> materials are cut without deformation
> clean cut edges – no trimming activities needed
> with chip breaker
> easy handling
> cutting width: 27 mm
> tool body: special tool steel, rolled, oilhardened
> blades: special tool steel, oilhardened, interchangeable
138
SPECIAL PLIERS