Datasheet

KNIPEX-Werk C. Gustav Putsch KG | Oberkamper Straße 13 | 42349 Wuppertal | Germany
[e-mail] | www.knipex.de
1
90 22 02 SB
{661602} Corrugated Pipe Cutter
For corrugated pipes with Ø of 13 - 32 mm
●
For cutting empty or ready-assembled corrugated pipes to length
●
Application in the electrical and construction trades and for plumbing
●
work
Recessed blades prevent injuries
●
Exact, flush cut, without damaging the internal cables
●
Cut on the outside of fluting – no sharp raw edge inside the
●
corrugated pipe
Fast and reliable work
●
Simple insertion of the corrugated pipe for reliable and simple
●
cutting: no waste
In the case of thick-walled corrugated pipes, reapply after the circular
●
cut just behind the cut, and break off the corrugated pipe
Slim and ergonomically shaped for work in poorly accessible areas
●
Double-sided guide for a precise cut
●
Body made of stable polyamide compound plastic
●
Internal cables cannot be damaged when cutting the corrugated pipes externally on the ridge. As a result, the inner pipe end at the cut point
always indicates a radius, so that no line is damaged during subsequent movements of the conductors or when inserting a new or additional
conductor.
Article No. 90 22 02 SB
EAN 4003773082293
Cutting capacities
(diameter) Ø mm
13 - 32
Wire stripping value
for conductors and
strands mm²
0,2 - 0,4
Length mm 100
Net weight g 46
technical change and errors excepted