Brochure

Precision Electronics Diagonal
Cutters
> Precision pliers for ultra fine cutting work, e. g. in electronics and fine
mechanics
> Very precisely ground and sharp cutting edges with very small bevels
for exact cutting on delicate electronic components; also available
without bevel for flush cutting
> Cutting edges additionally induction-hardened, cutting edge hardness
approx. 64 HRC
> Approx. 20 % lighter than conventional electronics pliers
> Bolted joint with carefully manufactured joint surfaces for even,
low-friction movement throughout the entire opening range
> Smooth-running double spring for a gentle and even opening
> Ergonomically optimised multi-component handles
> Ball bearing chrome steel, forged, multi stage oil-hardened
> DIN ISO 9654
79 02 120 / 79 22 120
> Mini-head
79 12 125
> Specially for cutting through hard wire and piano wire
79 32 125 / 79 42 125
> Pointed head
79 42 125 Z
> For an optimised flush cutting result of soft materials
79 52 125 / 79 62 125
> Pointed head; with lead catcher – no uncontrolled loss
of cut wire ends
The subtle difference
KNIPEX precision electronics pliers are made of high-quality ball
bearing steel and processed with the highest degree of care.
Each opening movement is gentle and even without backlash.
Each work step proceeds reliably and precisely. This makes work
much easier for professionals.
Article No.
EAN
4003773- mm Pliers Head Handles
Cutting capacities Dimensions
gØ mm Ø mm Ø mm Ø mm
B
mm
A
mm
D
mm
79 02 120 061403 120
burnished polished with multi-component grips
0.2 - 1.4 1.0 0.6 6.5 9.0 6.5 57
79 02 125 061281 125
burnished polished with multi-component grips
0.2 - 1.7 1.3 0.7 10.0 11.0 6.5 59
79 02 125 S1 071808 125 0.2 - 1.7 1.3 0.7 10.0 11.0 6.5 59
79 12 125 071365 125
burnished polished with multi-component grips
0.3 - 1.7 1.3 1.0 0.6 10.0 11.0 6.5 59
79 22 120 061427 120
burnished polished with multi-component grips
0.1 - 1.3 0.8 6.5 9.0 6.5 56
79 22 125 061342 125
burnished polished with multi-component grips
0.1 - 1.7 1.0 10.0 11.0 6.5 60
79 32 125 061366 125
burnished polished with multi-component grips
0.2 - 1.5 1.1 0.6 11.0 11.0 6.5 58
79 42 125 061380 125
burnished polished with multi-component grips
0.1 - 1.5 0.8 11.0 11.0 6.5 58
79 42 125 Z 078449 125
burnished polished with multi-component grips
0.1 - 1.3 11.0 11.0 6.5 58
79 52 125 065135 125
burnished polished with multi-component grips
0.2 - 1.3 0.9 0.5 11.0 11.0 6.5 58
79 62 125 065142 125
burnished polished with multi-component grips
0.1 - 1.3 0.8 11.0 11.0 6.5 58
Material catcher for 79 02 /
22 125 ESD see page 142
244
ELECTRONICS PLIERS
79 02 120
79 02 125 79 12 125
79 22 120 79 22 125
79 32 125 79 42 125 Z