Datasheet

88
CUTTING PLIERS
78
Electronic Super Knips
®
ESD
DIN ISO 9654
78 03 125 ESD
78 13 125 ESD
78 61 125 ESD
78 71 125 ESD
ESD pliers (electrostatic discharge)
N
electrostatic energy is discharged through the handles in a
gradual and controlled manner
N
which protects components endangered by electrostatic
discharge
N
in accordance with applicable standards, e.g. IEC TR 61
340-5, DIN EN 61 340-5, SP Method 2472
N
precision pliers for ultra fine cutting work, e.g. in electronics
and fine mechanics
N
electrically discharging handles – dissipative
N
ground, very sharp cutting edges without bevel for flush cutting
N
precision shaped tips cut wires resting on a board from 0.2 mm dia.
N
joint with stainless steel rivet
N
extremely smooth movement for minimum operator fatigue
N
with opening spring and restricted opening
78 03 125 ESD
INOX - stainless steel; cutting edge hardness approx. 54 HRC
78 13 125 ESD
INOX - stainless steel; cutting edge hardness approx. 54 HRC;
with lead catcher – no uncontrolled loss of cut wire ends
78 61 125 ESD
cutting edges additionally induction hardened, cutting edge hardness
approx. 64 HRC; special tool steel, burnished
78 71 125 ESD
with lead catcher – no uncontrolled loss of cut wire ends; cutting edges
additionally induction hardened, cutting edge hardness approx. 64 HRC;
special tool steel, burnished
Cutting capacities Dimensions
Article No. EAN
4003773-
mm
Pliers Head Handles
Ø mm Ø mm
B
mm
A
mm
D
mm
g
78 03 125 ESD 025146 125
polished with multi-component grips 0.2 - 1.6 1.0 9.0 13.5 7.5 55
78 13 125 ESD 025153 125
polished with multi-component grips 0.2 - 1.6 1.0 9.0 13.5 7.5 57
78 61 125 ESD 025184 125
burnished with multi-component grips 0.2 - 1.6 1.2 9.0 13.5 7.5 56
78 71 125 ESD 025191 125
burnished with multi-component grips 0.2 - 1.6 1.2 9.0 13.5 7.5 57