Datasheet

86
78 61 125
78 71 125
78 81 125
78 91 125
CUTTING PLIERS
78
Electronic Super Knips
®
DIN ISO 9654
78 03 125
78 13 125
78 23 125
60°
78 31 125
78 41 125
N
precision pliers for ultra fine cutting work, e.g. in electronics and
fine mechanics
N
ground, very sharp cutting edges without bevel for flush cutting
N
precision shaped tips cut wires resting on a board from 0.2 mm dia.
N
joint with stainless steel rivet
N
cutting edges additionally induction hardened
N
extremely smooth movement for minimum operator fatigue
N
with opening spring and restricted opening
N
in INOX or special tool steel
78 03 125 / 78 23 125
INOX – stainless steel; cutting edge
hardness approx. 54 HRC
78 13 125
INOX – stainless steel; cutting edge
hardness approx. 54 HRC; with lead
catcher – no uncontrolled loss of cut
wire ends
78 31 125
cutting edges additionally induction
hardened, cutting edge hardness
approx. 60 HRC; with narrow head;
special tool steel, burnished
78 41 125
cutting edges additionally induction
hardened, cutting edge hardness
approx. 60 HRC; with narrow head;
with lead catcher – no uncontrolled
loss of cut wire ends; special tool steel,
burnished
78 61 125
cutting edges additionally induction
hardened, cutting edge hardness
approx. 64 HRC; also suitable for
cutting glass fibre cables (fibre optics)
78 71 125
special tool steel, burnished; with lead
catcher – no uncontrolled loss of cut
wire ends; cutting edges additionally
induction hardened, cutting edge
hardness approx. 64 HRC
78 81 125
precision ground cutting edges with
very small bevel suitable also for hard
wire; special tool steel, burnished;
cutting-edge hardness approx. 64 HRC
78 91 125
precision ground cutting edges with
very small bevel suitable also for
hard wire; with lead catcher – no
uncontrolled loss of cut wire ends;
special tool steel, burnished; cutting
edges additionally induction hardened,
cutting edge hardness approx. 64 HRC