Datasheet

Pressemitteilung
Press release
Andreas Montag KNIPEX-Werk C. Gustav Putsch KG
Marketing Oberkamper Strasse 13
Phone [phone] D-42349 Wuppertal
E-mail [e-mail] Germany
www.knipex.de
KNIPEX TwinForce
The superior High Leverage Diagonal Cutter with
patented double hinge
Wuppertal, 27.02.2012 – With the TwinForce (Item No. 73 72 180) KNIPEX
presents a completely novel high leverage diagonal cutter. With its high
degree of stability due to two welded forged-in axles and precision-milled
functional surfaces it achieves impressive cutting performance.
The patented double-hinged design of the KNIPEX TwinForce enables a
very high transmission of force which permits cutting performance with
considerably less strain. At the same time the cutting impact is cushioned
because muscular tension is released gently instead of suddenly. The low
weight of the TwinForce is also an advantage when it is in continuous use.
50% less strain compared to other high leverage diagonal cutters of
the same size.
The TwinForce can be particularly beneficial for people cutting for long
periods, for example those working in wire drawing companies or in series
production. They need around half of the strength to cut medium hard wire
(Ø 2 mm) that would be required using tried and tested KNIPEX high
leverage diagonal cutters of the same size.
NEW for diagonal cutters: the ability to reapply the cutters.
The KNIPEX TwinForce cuts even 4 mm thick wire without great effort when
reapplied 2 or 3 times. Conventional high leverage diagonal cutters either
cannot cut these diameters at all or only with very considerable effort.
Contact:
Andreas Montag · Tel.: [phone] · [e-mail]