Datasheet
KNIPEX
Quality - Made in Germany
00 11
00 11 07
00 11
00 11 08
Pen-Style Control Cabinet Key, for all standard
cabinets and shut-off systems
Pen-style Profi-Key, for all standard shut-off systems
Distributed by:
KNIPEX-Werk
C. Gustav Putsch KG
Oberkamper Straße 13
42349 Wuppertal / Germany
Phone: +49(0)2 02/47 94-0
Fax: +49(0)2 02/47 74 94
Internet: www.knipex.de
E-Mail: info@knipex.de
Opening a control cabinet with
two-way key (Article No. 00 11 07)
Square for air bleeding
(Article No. 00 11 07 + 00 11 08)
Tightening a screw with cross recess bit
PH2 (Article No. 00 11 07 and 00 11 08)
Square in steps for opening a door
without handle (Article No. 00 11 08)
L100 01738/01/09.06/5.000/GB
Article No.
9
EAN-
9
Capacity
Code Length
4003773- mm mm Ø mm mm g
00 11 07 063018 5/6/8 9 9 145 140
왘 easy to carry pen-style control
cabinet key with fastening clip
왘 four different key profiles can
be utilized by swivelling the key
holder
왘 for control cabinets and
shut-off systems in the supply
of gas, water and electricity
왘 for technical installations in
buildings, e. g. air conditioning
and ventilation systems,
shut-off valves, mains
switch-boards, etc.
왘 female square 5; 6 + 8 mm
왘 triangular 9 mm
왘 two-way key bit 5 mm dia.
(internal) / 9 mm dia. (external)
왘 universal 1/4" bit adapter for
standard bits (permanent
magnet for retaining)
왘 additional bit adapter for 1/4"
bits inside one key profile
왘 with bit insert: cross recess PH 2
and possibility of safekeeping a
second bit
왘 practical clip for safe transport
왘 corpus and fastening clip made
from GRP plastic material; tool
holder and key profiles zinc
diecast
왘 easy to carry pen-style control
cabinet key with fastening clip
왘 three different key profiles can
be utilized by swivelling the key
holder
왘 multi-purpose key for the
builder
왘 key for heating, air-
conditioning, sanitary and
building engineering, e. g. for
door and window handles or for
air bleeding heaters
왘 female square 5 + 8 mm
왘 triangular 9 mm
왘 male square in steps of
6 / 7 / 8 / 9 mm
왘 universal 1/4" bit adapter for
standard bits (permanent
magnet for retaining)
왘 additional bit adapter for 1/4"
bits inside one key profile
왘 with bit insert: cross recess PH 2
and possibility of safekeeping a
second bit
왘 practical clip for safe transport
왘 corpus and fastening clip made
from GRP plastic material; tool
holder and key profiles zinc
diecast
Article No.
9
EAN-
9
Capacity
Code Length
4003773- mm mm Ø mm mm g
00 11 08 063025 5 + 8 9 6/7/8/9 145 130