Instruction Manual

WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
This product is not suitable for installation in or near a coastal or marine environment.
•
•
•
•
•
•
•
•
Fig. 3
• For surface mounted wiring, a suitable IP rated gland can be used to feed through the side of the backplate
• Connect the luminaire to the mains supply ensuring that correct polarity is observed: L - Live (Brown),
E -Earth (Green/Yellow), N - Neutral (Blue)
Note – Please note this luminaire comes with the photocell not connected. To use the features of the
photocell, please plug the photocell plug into the socket
• Select the colour temperature via the 3-position switch
• Fit the luminaire to the baseplate and secure with the four screws
• Switch on and check for correct operation