Installation Guide

Fig. 4
• Ensure the earth lead on the LED plate is secured correctly to the earth lead on the body of the fitting
• Fix the LED tray to the body
• Choose the required colour temperature by means of the three-position switch (see Fig. 4)
• Replace the diffuser ensuring seal is in place
• Switch on and check for correct operation
ensuring the green indicator LED is
illuminated
• We recommend, on commissioning the
installation, a minimum charge period of
24 hours before carrying out an emergency
duration test
•
•
•
•
•
•
•
•
WARNING
This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance
testing. Irreparable damage will occur if this instruction is not followed.
This product is not suitable for installation in or near a coastal or marine environment.