INSTALLATION & MAINTENANCE MANUAL NH023AW / NH023B NH025AW
GENERAL INSTRUCTIONS These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following products: NH023AW / NH023B / NH025AW SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
• • • • • • • INSTALLATION Note - If this luminaire is being used in conjunction with an external PIR or sensor, please confirm with the manufacturer of the sensors that they are compatible with LED luminaires. • Provide power to the required point of installation • • • Remove the front plate by placing a medium size flat-head screwdriver in the notch on the side and lever off gently (see Fig. 1) Fig.
• Connect the luminaire to the mains supply ensuring the correct polarity is observed: L – Live (brown), E – Earth (green/yellow), N – Neutral (blue) • All earth connections must be made and maintained.
GENERAL • This product contains a light source of energy efficiency class G (NH023AW, NH025AW) to Regulation (EU) No. 2019/2015 and (UK) 2021 No. 1095. • This product contains a nonreplaceable LED light source and a nonreplaceable control gear • Clean with a soft dry cloth only, do not use aggressive cleaning products or solvents which may damage the product. • This product is nondimmable. • This product should be dismantled for disposal when it reaches the end of its life.
INTERNATIONAL CONTACT DETAILS 35°C TA 02 ML Accessories Limited LU5 4LT www.mlaccessories.co.
